NETGEAR EX6200 Wireless Extender Firmware

Fixes:

- Added wireless 2.4G JP Country code and whether channel Ch120~128 for JP region.
- Updated firmware for new hardware change.
- Updated wireless driver to fix 5GHz interface with Access Point mode scan fail.
- Fixed fail to assign IP address to Ethernet LAN after reset.

To Upgrade:

- Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
- Download and extract the new firmware to a convenient place such as your desktop.
- Log in to the device using a Web browser.
- Click Maintenance > Firmware Upgrade
- Click Browse and find the file you just downloaded.
- Click Upload. While the firmware is loading, do not interrupt the upgrade process.

Important Note:

- The upgrade process is completed when the on screen progress bar completes.
- EX6200 doesn't have power LED. It has three LED’s above the LAN LED. 
- If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, please see the two arrows LED (Device to Extender LED). During upgrading, this LED will blink amber. After firmware upgrade is done and boots up the system, it changes to steady green color.
- Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.